Photoresist is a particular kind of material which has applications in fields such as printing and electronics. It provides a barrier for surfaces when creating products. Once it has done its task of guarding, we have to thr very delicately and gently extract. This is needed to test everything works well, and looks good. Some handy tips on safe photo resist stripping to make sure nmakes it right way opening the doors for us.
The kind of photoresist that you are using is the first thing which comes to mind when we talk about removing off a photoresist from your printing items like screens or plates. Positive and negative are the two most common kinds. This removal can be done using a chemical known as developer, and it only works for positive photoresist. Negative photoresist, however, is removed by stripper fluid.
Regardless of the sort you are dealing with, recovery must take place in an area that has appropriate air flow. This ensures that no toxic chemicals remain in the air. Also Gloves & Safety Glasses to protect from any chemicals getting into your eyes or on you skin. Clean your surface very well before using the liquid to take off the photoresist. It lets the liquid stick better and makes it easier to remove.
If you intend to layer the surface after removing the photoresist, clean track is advisable. A plasma etcher is a fantastic tool for this. This allows the step of residue photoresist removal H2 will leave no harm on the substrate surface In the case of glass, metal or plastic surfaces it is really efficient.
Or you can choose a chemical stripper that suits your photoresist. It results in a more accurate and gentle stripping of the photoresist. This can be done in one confined area or even limited to a single location. Anyway, it is critical to verify that you use the right stripper for your photoresist. This is so you do not mistakenly ruin the thing that needs cleaning as well.
The machine uses a combination of heat, mechanical action and chemicals to quickly and thoroughly strip the photoresist. It looks clean on larger surfaces such as screens and circuit boards. This entire process can be completed in minutes, making it extremely helpful when the work piled upon you increases. And on the plus side, this machine barely creates waste which makes it a better environment-friendly option for businesses.
De-gumming of photoresist on printed circuit boards (PCBs) or strong electronic components is, however a little different from these surfaces. The first step is to clean the surface (ensure its dust and grease free) And then, if you get the clean surface of your choice Liquid depending on which photoresist you are using.
Guangzhou Minder-Hightech Co.,Ltd.
Copyright © Guangzhou Minder-Hightech Co.,Ltd. All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
IT
KO
NO
PL
PT
RO
RU
ES
SV
TL
IW
ID
LT
SR
SL
UK
VI
ET
HU
TH
TR
FA
AF
MS
GA
IS
HY
AZ
KA
