96 Channel Power Battery Grading Machine , China 96 Channel Power Battery Grading Machine Manufacturers, Suppliers, Factory

Key Technologies:

Energy saving: comprehensive energy saving of more than 70%, high-power inverter technology
High efficiency: labor efficiency increased by 50%
High quality: accuracy deviation <0.5% after 500 consecutive charging and discharging, high precision and stable detection technology

Advantages:

Product stability: Single-point independent constant current and constant voltage power supply, complete protection functions, stable operation, selected materials, fine craftsmanship, higher service life than peers, and fast inspection speed.
Technical excellence: The feeder-type energy-saving mode design is adopted, which has high energy-saving efficiency, flexibility, and humanized intelligent operation. The product linearity, accuracy and speed have reached high standards, and the maintenance and upgrades are good for expansion.
Accuracy: Each battery fixture is designed with the internationally popular four-wire principle, which avoids the superimposition of the internal resistance of the tester on the internal resistance of the battery and makes the test results more accurate.
Flexible: When the battery under test has low voltage, undercurrent, overvoltage, or overcurrent, the control system will close this channel and separate the battery from the device.
Cost-effective: rich experience, strong technology, professional management team, wide range of product use and praise from customers, the performance indicators and product quality of similar products have the most cost-effective advantages.
7*24 hours after-sales service: The product is guaranteed for one year, free of charge and careful technology.

Energy-saving battery based on high-frequency power feedback technology

Charging mode: PWM switching power supply mode is adopted to realize constant current and constant voltage charging of the battery.

Advantages: high power conversion efficiency, generally above 85%.

图2.jpg 图1.jpg

Discharge mode: First, the voltage of the battery is increased by the PWM boost circuit and sent to the inverter power supply, and then gradually increased to be converted into AC power and sent to the AC grid, and finally the battery discharge power is fed back and reused.

Advantages: The discharged electric energy of the power supply is well recycled and reused, and the energy saving effect is obvious.

图3.jpg

Equipment structure:

model	MDSC- S15-96-20	MDSC-S14-128-10	MDSC-S16-128-10
Device channel number	The whole machine has a total of 96 channels	The whole machine has a total of 128 channels	The whole machine has a total of 128 channels
Dimensions	1680mm×930mm×1840mm	1680mm×930mm×1840mm	1850mm×900mm×1840mm
Chassis color	Standard white (customizable)
Fixture form	Terminal block + alligator clip	Automatically open the clamp, 80 split rail polymer clamp	Push down
Fixture spacing	150mm	150mm	40-155mm
Support battery specifications	Polymer battery, prismatic battery	Polymer battery, soft pack battery	Square battery, height 110-220mm, thickness 15-75mm, width 65-220mm
Power supply	Three-phase five-wire system AC380V±10%, 50HZ
Working power consumption	≤16KW	≤11KW	≤11KW
working environment	Temperature 0～40℃, relative humidity≤80%
Cooling method	Natural intake, upward exhaust

Channel parameters:

model	MDSC- S15-96-20	MDSC-S14-128-10	MDSC-S16-128-10
Voltage measurement range	0～5V
Battery voltage range	Charge 0～4.5V; Discharge 4.5～2V
Constant voltage range	2.5～4.5V
Voltage accuracy	±(1‰ reading+1‰ full scale)
Voltage resolution	1mV
Voltage stability	≤1‰
Current range	Charge 200mA～20A Discharge 200mA～20A	Charge 100mA～10A discharge 100mA～10A	Charge 100mA～10A Discharge 100mA～10A
Current accuracy	±(1‰ reading+1‰ full scale)
Current resolution	10mA
Stable current	≤1‰

Software functions:

model	MDSC- S15-96-20	MDSC-S14-128-10	MDSC-S16-128-10
	动力电池分容设备	动力电池分容设备	动力电池分容设备
way to control	The software is installed on the computer to connect to the equipment, and the whole cabinet is controlled
communication method	Serial port, baud rate 57600
Process settings	Up to 32 steps and 256 cycles can be set
Charging mode	Constant current, constant voltage, constant current and constant voltage
Charging cut-off condition	Voltage, current, time, capacity
Discharge mode	Constant current
Discharge cut-off condition	Voltage, time, capacity
Protective function	Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power failure protection, data breakpoint recovery
time limit	Arbitrarily set within 0～30000 minutes, the time unit is min
Time accuracy	≤±1‰
Sampling inspection cycle	≤4s
Minimum data recording frequency	≤5s
Battery sorting	Sort by (capacity, time, open circuit voltage, discharge platform, etc.)
data processing	Can record voltage, current, time, capacity and other data, automatically calculate constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data, provide data graphs and cycle diagrams; can output generated text, EXCEL, WORD Or MDB database format file

Home

About Us

MH Equipment

Case Video

Solution

Oversea Users

Contact Us

96 Channel Power Battery Grading Machine

More Products

MD-DD-T5511 Glue Fixation Machine for Battery Packs line

MDUC-600 UV Curing Machine for battery pack line

MDLC-500 Conveyor Laser Cleaner

MDAWB-5NL400 Automatic Wire Bonder

Inquiry

Articles

Products

Get In Touch